CE Approved Film and Fabric Lamination Machine/Hot Melt Coating Machine
|FOB Price:||US $20,000-80,000 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $20,000-80,000/ Piece|
|Production Capacity:||150 Set/Year|
|Transport Package:||Wooden Case|
|Payment Terms:||L/C, T/T|
- Model NO.: JYT-H
- Driven Type: Mechanical
- Packaging Material: Wood
- Application: Electronics, PE, EVA, Paint, Shoes, Fabric, Sponge
- Specification: CE, SGS
- Type: Roll Coater
- Automatic Grade: Automatic
- Packaging Type: Cans
- Trademark: Jiayuan
- Origin: China
Main Characteristics Of Hot Melt Coating Machine:
1. Both the first and second unwind adopt self-existent machine frame, with automatic edge controller, which makes lamination more ideal.
2. Unwinds collocate electric-motor uploading and downloading functions.
3. This machine has all functions of JYT-B Hot Melt Coating Machine.
Range of Application of Hot Melt Coating Machine:
This machine is used for producing self-adhesive products, such as self-adhesive tapes, double-side tapes, fabric tapes, double-side foam tapes, duct tapes, craft tapes, clean adhesive tapes, masking tapes, aluminum foil tapes, etc. And also suitable for laminating different material such as non-woven, filter materials, medical materials, label, etc.
Technical Parameter Of Hot Melt Coating Machine:
Part One. Main technical parameters
1. coating mode: slot die
2. maximal coating width:1100mm
3. coating weight:15-200g/m2
5. machine speed:50m/min
6. roller length:700mm
7. Dia. of rewind:1000mm
8. Dia. of unwind:1000mm
9. unwind device:2 sets
10. rewind device:1 set
11. adhesive melting speed:130kg/h capacity 200kg
12. glue hose length:3m
13. temperature: 210°C
14.machine power:about 32kw
15.electrical power:380V ±15% 50Hz
16. Both speed of main machine and quantity of glue feeding are automatic synchronous tracking and manual control .
17. Stable tension controller
18. Edge slitting device
Part Two: Introduction
(one) machine configuration
1. The unwind device is jointed of quadrate steel, groove steel and iron steel
2. The main machine configuration adopts 25mm steel plate and steel tube to brace.
3. Driving-shell adopts 1.5mm armor plate
4. The rewinder is installed in the main configuration.
(Two) hot melt tank
1. The tank shell is jointed of quadrate steel, groove steel and 1.2mm steel plate
2. The hot melt is founded of aluminum alloy there is three layers constructions , the inner layer is coated with anti-sticking Teflon layer.
3. Adopt molten heater
4. The glue pump adopts metric gear pump that can bear high temperature
5. Collocate exact filter
6. The glue feeding pump adopts gear pump electric-motion frequency conversion to adjust speed
7.The temperature adopts PID controller. The two layers are controlled independently
8.The high temperature is 210°C
9.The heating power:24kw